Product ID:TOUGH-ONE ELECTRODE 5/32
MSDS Date:12/12/1988
FSC:3439
NIIN:01-186-0366
MSDS Number: BRTHL

X-ERGON,A PARTSMASTER CO.,DIV. OF NCH

1400 E NORTHGATE DR
IRIVING, TX 75015-2102
US

Emergency Phone: 214-438-1381

Info Phone: 800-442-7950

Preparer: MICHAEL COLE

Cage: EO081

X-ERGON,A PARTSMASTER CO.,DIV OF NCH

152170 IRVING, TX 75015 US

Telephone: 972-438-1381

Cage: EO081

RUTILE

IRON

CAS: 7439-89-6

RTECS: NO4565500

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

SODIUM AND POTASSIUM SILICATE

FLUORSPAR

CAS: 14542-23-5

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9293

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
SENSITIVITY MAY ALSO BE NOTED. A CUTE EXPOSURE FROM SOME TOXIC
GASES MAYCAUSE PULMONARY EDEMA, ASPHYXIATION AND EXCESSIVE EXPOSURE
CAN BE FATAL.
Effects of Overexposure:METALLIC TASTE, NAUSEA, TIGHTNESS OF CHEST,
FEVER, DIZZINESS. EYE, NOSE, THROAT DRYNESS AND IRRITATION.
Medical Cond Aggravated by Exposure:PULMONARY DISEASES.

First Aid:IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL
FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF
BREATHING IS D IFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.

Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLE PRODUCTS.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN SUITABLE DOT APPROVED DISPOSAL CONTAINER.

Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS IF TLV IS EXCEEDED OR WHEN USING
IN CONFINED SPACES.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE SHLD W/FILTER LENS.
Other Protective Equipment:LONG SLEEVE CLOTHES, ARM PROTECTOR, APRON,
HAT, SHOULDR PROTECTION.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER WELDING.
Supplemental Safety and Health

HCC:N1
Appearance and Odor:WELDING ELECTRODES

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS AND METAL
OXIDES,CO,NO2,O3.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.